Dimmable LED Flash | Why it happens? & How to Fix Flickering

Dimmable LED Flash | Why it happens? & How to Fix Flickering

Flickering LED lights may be quite annoying. It’s also rather typical that almost everyone has experienced a flickering light at some point in time. Dimmable LED flash commonly happens when switching from traditional incandescent or halogen lamps to modern, power LED bulbs and linking with a dimmer control.

When you try to dim the LED lights, you could find that the recently placed LEDs are flashing, which can be bothersome. The typical lights were always just functioning well and never giving you any flickering troubles, So it doesn’t come out the way you expected it to; in fact, it’s worse. Without a dimmer, other technical reasons can potentially cause dimmable LED flash and flickering.

Dimmable Led Flash

Bad for Health:

Flickers and dimmable LED flash are harmful to your health since they may either be observed with the bare eyes or they can be invisible because they move too rapidly to be observed. Both kinds of flashing can be harmful and cause a variety of health issues, including migraines, epileptic seizures, exhaustion, headaches, dizziness, and eyestrain. It might be disturbing only to have visual flicker present.

Why Dimmable LED Flash happens:

In contrast to typical incandescent and neon lights, which need a filament to convert energy into heat before turning it into light. LED bulbs employ an electrical driver to convert power straight into light. Dimmable LED Flashes are the most likely to flicker because voltage fluctuations directly affect them. They are extremely sensitive to them. Incandescent lights also tend not to flicker since they are heated until they glow. It gradually warms up and cools down, so it takes some time to accomplish either.

LEDs are very high-quality and trustworthy. Even while current LED bulbs have made great advancements to better manage voltage changes, voltage unbalance is still the primary cause of dimmable LED flash and flickering.

As a result, when an LED light flickers or flashes, voltage changes are almost always to blame. One of the most common and significant explanations among all conceivable ones is the usage of a dimmer switch. Therefore, we’ll mostly address LED flickering problems with or without a dimming control in the sections that follow.

1. Faulty Wiring

A loose connection in the circuit is one of the most common reasons why your LED flickers. The loose connection might be brought on by frayed, damaged, corroded, outdated, or improperly fitted wire. It may happen anywhere in your house, including behind wall switches, light fixtures, circuit breakers, worn-out connections, and wires hidden behind walls.

Dimmable Led Flash

Always begin by eliminating the simplest and most obvious options. You may be able to immediately fix the issue by firmly inserting your bulb into the socket. If the issue continues and cannot be easily detected. Contact a licensed electrician to inspect the wiring in your home.

2. Fix Panel by an electrician

If you notice LEDs flashing throughout the whole building, the voltage fluctuations can be coming from outside your house. The voltage fluctuation problem might be coming from your main electrical main switchboard, main service cable, meter connection, or breaker box. It can also originate from there if the local electricity company or electrical grids is sustaining the electricity or if there is bad weather. If the flashing persists and worsens, you might assume you have a voltage variation problem.

3. Dimmable LED Flash Fluctuation Using a Transformer

If you’re utilizing low-voltage LED lights with your transformer, the flickering of your LEDs is probably due to an incompatible transformer. Although it is not designed particularly for LEDs, the current transformer might be an electronic filament or neon transformer. The current transformer may have a minimum load requirement that is too high for low-watt LED bulbs to meet yet is appropriate for loading a halogen light successfully.

In any case, verify sure the transformer is suitable for LED bulbs before utilizing low-voltage lighting with it to prevent LED flickering.

4. Irregular Electricity

Why LEDs blink even when the lights are off is something you might be wondering. Remaining electricity is typically at fault. The circuit retains energy even after the switch is off, and any residual current passes to the lightbulb. The minor leakage current can however cause the dimmable LED flash to flicker. This flash even if it is insufficient to enable the LED bulb to illuminate continuously since LEDs only need a small amount of power.

5. Inrush current for large appliances

When you switch on large, high-wattage equipment like an air conditioning unit, washer, or corded vacuum, the overload switch-on spike current may cause the LED in the same circuit to flicker. It’s frequently not a big thing to be concerned about if an LED bulb occasionally flickers for a brief length of time when you switch on a large appliance.

Dimmable led flash inrush currrent

6. Dimmable LED Flash due to Unbalanced Circuits

If the LED light is still flashing after the large appliance has been running for some time. You may have a circuit overflow, which indicates you are using too many loads simultaneously on the circuit. Another possibility is that one of the large appliances is damaged, which would account for the circuit’s LED light blinking. Contact a professional electrician to fix the circuit overload problem if removing certain equipment is unable to stop the flickering.

7. Voltage fluctuation

Voltage fluctuations may cause dimmable LED flash flickering, and over time, the problem might get worse. Due to corrosion or loose connections within the home, overhead wires, loaded circuits, or wires with small conductors can all cause voltage swings.

Ways to fix Dimmable LED Flash:

Here are some technical ways to fix the dimmable led flash

Using a Dimmer and a Neutral Wire

The leak holding current that enables the LED to blink when the switch is turned off may be removed by using a neutral-required dimmer switch, as was already explained above. A small amount of electrical current will escape to the dimmable LED flash if a dimmer control is fitted utilizing ground wire, which might result in flickering.

Include a Bypass capacitor

In order to prevent the residual current from reaching the load (such as your LED lights, etc.), one simple, universal fix is to connect a bypass capacitor to the load.

Upgrading to New Fixtures or Bulbs

Sometimes the only method to prevent a dimmable LED from flickering is to replace the cheap light with a fresh one. A poorly made LED cannot be successfully stopped from flickering.

Add a small nightlight or halogen lamp

You can rapidly fix the issue by connecting a modest-watt incandescent, halogen, or night light in parallel with the LED bulbs, much like the bypass capacitor technique. There is little to no resistance in a cold, unlit incandescent bulb, which creates a conduit for leakage current to avoid LEDs. Additionally, the additional incandescent might function as an additional low load to aid LED stability.

Use a smart switch

Always use a smart switch with a neutral wire to avoid dimmable LED flash. Avoid using a neutral wire with a dimmer switch. The white neutral wire is not used by most dimmer switches. You can utilize a smart switch that requires a neutral wire if your wall switch has a neutral wire accessible. The leakage or residual current in this situation will travel to the ground rather than to your light bulb because the ground wire is solely utilized for earthing. If you must use a ground-wire smart switch because you lack a neutral wire, consider upgrading to a higher-quality one that is tailored for LEDs.

Enhance Breaker

Repair the breaker issue.You can determine which high-wattage appliance is to blame for the flickering by turning each one on separately and watching to see which one does it. Switch the large, high-wattage device for a smaller one, or call a professional electrician to replace the wires or fix the breaker.


Can LED Lights That Blink Pose a Risk of Electrical Fire faulty wiring ?

Flickering LED lights can indeed be dangerous. Common flickering causes like bad wiring or circuit overloading are among the primary causes of an electric arc. Additionally, damaged wiring may degrade over time. If you see the flickering is plainly becoming worse before it is too late. You should get help from a professional electrician right away.

Furthermore, there is no need to be concerned if the blinking only happens infrequently. It can be fixed by adding new bulbs or lights.

Do LED lights blink before burning out?

The majority of dimmable LED flash will diminish or get dark before they run out, and other LEDs may alternate between periods of on and off activity. LED lights often don’t flicker.

Final Thoughts:

Dimmable LED Flash can occur due to many reasons. Continuous flickering can cause headache and pain in eyes. You need to find out the exact reason for this blinking of LEDs. Once you understand the reason, remove it according to a systematic way. If you cannot understand the process please bring an electrician for the maintenance of the LEDs. Do not try to be over smart and decide to remove the issue. Hope this article helps you in a positive way. Hope so you enjoy this article for more info must visit techstarlink.com.


Hi, This is Engr Hamza. I welcome you all on Techstarlink.com. Here, I am sharing Latest News, Tech Innovations, Changing Trends and Leading Ideas. Stay Tuned and Enjoy Thanks!

Leave a Reply

Your email address will not be published. Required fields are marked *